Skip to content
GitLab

Reduce Container Registry storage (FREE)

Container registries can grow in size over time if you don't manage your registry usage. For example, if you add a large number of images or tags:

  • Retrieving the list of available tags or images becomes slower.
  • They take up a large amount of storage space on the server.

You should delete unnecessary images and tags and set up a cleanup policy to automatically manage your container registry usage.

Check Container Registry storage use

The Usage Quotas page (Settings > Usage Quotas > Storage) displays storage usage for Packages. This page includes the Container Registry usage, which is only available on GitLab.com. Measuring usage is only possible on the new version of the GitLab Container Registry backed by a metadata database. Support for improvements is proposed in epic 5523. On self-managed instances, you cannot use the Container Registry with a metadata database. For the plan to change this behavior, see epic 5521.

Image layers stored in the Container Registry are deduplicated at the root namespace level.

An image is only counted once if:

  • You tag the same image more than once in the same repository.
  • You tag the same image across distinct repositories under the same root namespace.

An image layer is only counted once if:

  • You share the image layer across multiple images in the same container repository, project, or group.
  • You share the image layer across different repositories.

Only layers that are referenced by tagged images are accounted for. Untagged images and any layers referenced exclusively by them are subject to online garbage collection. Untagged images are automatically deleted after 24 hours if they remain unreferenced during that period.

Image layers are stored on the storage backend in the original (usually compressed) format. This means that the measured size for any given image layer should match the size displayed on the corresponding image manifest.

Cleanup policy

  • Renamed from "expiration policy" to "cleanup policy" in GitLab 13.2.
  • Required permissions changed from developer to maintainer in GitLab 15.0.

The cleanup policy is a scheduled job you can use to remove tags from the Container Registry. For the project where it's defined, tags matching the regex pattern are removed. The underlying layers and images remain.

To delete the underlying layers and images that aren't associated with any tags, administrators can use garbage collection with the -m switch.

Enable the cleanup policy

You can run cleanup policies on all projects with these exceptions:

  • For self-managed GitLab instances, the project must have been created in GitLab 12.8 or later. However, an administrator can enable the cleanup policy for all projects (even those created before GitLab 12.8) in GitLab application settings by setting container_expiration_policies_enable_historic_entries to true. Alternatively, you can execute the following command in the Rails console:

    ApplicationSetting.last.update(container_expiration_policies_enable_historic_entries: true)

    Enabling cleanup policies on all projects can impact performance, especially if you are using an external registry.

WARNING: For performance reasons, enabled cleanup policies are automatically disabled for projects on GitLab.com that don't have a container image.

How the cleanup policy works

The cleanup policy collects all tags in the Container Registry and excludes tags until the only tags you want to delete remain.

The cleanup policy searches for images based on the tag name. Support for full path matching is tracked in issue 281071.

The cleanup policy:

  1. Collects all tags for a given repository in a list.
  2. Excludes the tag named latest.
  3. Evaluates the name_regex (tags to expire), excluding non-matching names.
  4. Excludes any tags matching the name_regex_keep value (tags to preserve).
  5. Excludes any tags that do not have a manifest (not part of the options in the UI).
  6. Orders the remaining tags by created_date.
  7. Excludes the N tags based on the keep_n value (Number of tags to retain).
  8. Excludes the tags more recent than the older_than value (Expiration interval).
  9. Deletes the remaining tags in the list from the Container Registry.

WARNING: On GitLab.com, the execution time for the cleanup policy is limited. Some tags may remain in the Container Registry after the policy runs. The next time the policy runs, the remaining tags are included. It may take multiple runs to delete all tags.

WARNING: GitLab self-managed installations support third-party container registries that comply with the Docker Registry HTTP API V2 specification. However, this specification does not include a tag delete operation. Therefore, GitLab uses a workaround to delete tags when interacting with third-party container registries. Refer to issue 15737 for more information. Due to possible implementation variations, this workaround is not guaranteed to work with all third-party registries in the same predictable way. If you use the GitLab Container Registry, this workaround is not required because we implemented a special tag delete operation. In this case, you can expect cleanup policies to be consistent and predictable.

Example cleanup policy workflow

The interaction between the keep and remove rules for the cleanup policy can be complex. For example, with a project with this cleanup policy configuration:

  • Keep the most recent: 1 tag per image name.
  • Keep tags matching: production-.*
  • Remove tags older than: 7 days.
  • Remove tags matching: .*.

And a container repository with these tags:

  • latest, published 2 hours ago.
  • production-v44, published 3 days ago.
  • production-v43, published 6 days ago.
  • production-v42, published 11 days ago.
  • dev-v44, published 2 days ago.
  • dev-v43, published 5 day ago.
  • dev-v42, published 10 days ago.
  • v44, published yesterday.
  • v43, published 12 days ago.
  • v42, published 20 days ago.

In this example, the tags that would be deleted in the next cleanup run are dev-v42, v43, and v42. You can interpret the rules as applying with this precedence:

  1. The keep rules have highest precedence. Tags must be kept when they match any rule.
    • The latest tag must be kept, because latest tags are always kept.
    • The production-v44, production-v43, and production-v42 tags must be kept, because they match the Keep tags matching rule.
    • The v44 tag must be kept because it's the most recent, matching the Keep the most recent rule.
  2. The remove rules have lower precedence, and tags are only deleted if all rules match. For the tags not matching any keep rules (dev-44, dev-v43, dev-v42, v43, and v42):
    • dev-44 and dev-43 do not match the Remove tags older than, and are kept.
    • dev-v42, v43, and v42 match both Remove tags older than and Remove tags matching rules, so these three tags can be deleted.

Create a cleanup policy

You can create a cleanup policy in the API or the UI.

To create a cleanup policy in the UI:

  1. For your project, go to Settings > Packages and registries.

  2. In the Cleanup policies section, select Set cleanup rules.

  3. Complete the fields:

    Field Description
    Toggle Turn the policy on or off.
    Run cleanup How often the policy should run.
    Keep the most recent How many tags to always keep for each image.
    Keep tags matching A regex pattern that determines which tags to preserve. The latest tag is always preserved. For all tags, use .*. See other regex pattern examples.
    Remove tags older than Remove only tags older than X days.
    Remove tags matching A regex pattern that determines which tags to remove. This value cannot be blank. For all tags, use .*. See other regex pattern examples.

  4. Select Save.

The policy runs on the scheduled interval you selected.

NOTE: If you edit the policy and select Save again, the interval is reset.

Regex pattern examples

Cleanup policies use regex patterns to determine which tags should be preserved or removed, both in the UI and the API.

Regex patterns are automatically surrounded with \A and \Z anchors. Therefore, you do not need to include any \A, \Z, ^ or $ tokens in the regex patterns.

Here are some examples of regex patterns you can use:

  • Match all tags:

    .*

    This pattern is the default value for the expiration regex.

  • Match tags that start with v:

    v.+

  • Match only the tag named main:

    main

  • Match tags that are either named or start with release:

    release.*

  • Match tags that either start with v, are named main, or begin with release:

    (?:v.+|main|release.*)

Set cleanup limits to conserve resources

  • Introduced in GitLab 13.9 with a flag named container_registry_expiration_policies_throttling. Disabled by default.
  • Enabled by default in GitLab 14.9.
  • Removed the feature flag container_registry_expiration_policies_throttling in GitLab 15.0.

Cleanup policies are executed as a background process. This process is complex, and depending on the number of tags to delete, the process can take time to finish.

You can use the following application settings to prevent server resource starvation:

  • container_registry_expiration_policies_worker_capacity: the maximum number of cleanup workers running concurrently. This value must be greater than or equal to 0. You should start with a low number and increase it after monitoring the resources used by the background workers. To remove all workers and not execute the cleanup policies, set this to 0. The default value is 4.
  • container_registry_delete_tags_service_timeout: the maximum time (in seconds) that the cleanup process can take to delete a batch of tags. The default value is 250.
  • container_registry_cleanup_tags_service_max_list_size: the maximum number of tags that can be deleted in a single execution. Additional tags must be deleted in another execution. You should start with a low number and increase it after verifying that container images are properly deleted. The default value is 200.
  • container_registry_expiration_policies_caching: enable or disable tag creation timestamp caching during execution of policies. Cached timestamps are stored in Redis. Enabled by default.

For self-managed instances, those settings can be updated in the Rails console:

ApplicationSetting.last.update(container_registry_expiration_policies_worker_capacity: 3)

They are also available in the administrator area:

  1. On the top bar, select Main menu > Admin.
  2. Go to Settings > CI/CD > Container Registry.

Use the cleanup policy API

You can set, update, and disable the cleanup policies using the GitLab API.

Examples:

  • Select all tags, keep at least 1 tag per image, clean up any tag older than 14 days, run once a month, preserve any images with the name main, and the policy is enabled:

    curl --request PUT --header 'Content-Type: application/json;charset=UTF-8' --header "PRIVATE-TOKEN: <your_access_token>" \
     --data-binary '{"container_expiration_policy_attributes":{"cadence":"1month","enabled":true,"keep_n":1,"older_than":"14d","name_regex":".*","name_regex_keep":".*-main"}}' \
     "https://gitlab.example.com/api/v4/projects/2"

Valid values for cadence when using the API are:

  • 1d (every day)
  • 7d (every week)
  • 14d (every two weeks)
  • 1month (every month)
  • 3month (every quarter)

Valid values for keep_n (number of tags kept per image name) when using the API are:

  • 1
  • 5
  • 10
  • 25
  • 50
  • 100

Valid values for older_than (days until tags are automatically removed) when using the API are:

  • 7d
  • 14d
  • 30d
  • 90d

See the API documentation for further details: Edit project API.

Use with external container registries

When using an external container registry, running a cleanup policy on a project may have some performance risks. If a project runs a policy to remove thousands of tags, the GitLab background jobs may get backed up or fail completely. For projects created before GitLab 12.8, you should enable container cleanup policies only if the number of tags being cleaned up is minimal.

More Container Registry storage reduction options

Here are some other options you can use to reduce the Container Registry storage used by your project:

Troubleshooting cleanup policies

Something went wrong while updating the cleanup policy.

If you see this error message, check the regex patterns to ensure they are valid.

GitLab uses RE2 syntax for regular expressions in the cleanup policy. You can test them with the regex101 regex tester using the Golang flavor. View some common regex pattern examples.

The cleanup policy doesn't delete any tags

There can be different reasons behind this:

  • In GitLab 13.6 and earlier, when you run the cleanup policy you may expect it to delete tags and it does not. This occurs when the cleanup policy is saved without editing the value in the Remove tags matching field. This field has a grayed out .* value as a placeholder. Unless .* (or another regex pattern) is entered explicitly into the field, a nil value is submitted. This value prevents the saved cleanup policy from matching any tags. As a workaround, edit the cleanup policy. In the Remove tags matching field, enter .* and save. This value indicates that all tags should be removed.

  • If you are on GitLab self-managed instances and you have 1000+ tags in a container repository, you might run into a Container Registry token expiration issue, with error authorizing context: invalid token in the logs.

    To fix this, there are two workarounds:

    • If you are on GitLab 13.9 or later, you can set limits for the cleanup policy. This limits the cleanup execution in time, and avoids the expired token error.

    • Extend the expiration delay of the Container Registry authentication tokens. This defaults to 5 minutes. You can set a custom value by running ApplicationSetting.last.update(container_registry_token_expire_delay: <integer>) in the Rails console, where <integer> is the desired number of minutes. For reference, the expiration delay is set to 15 minutes on GitLab.com. If you increase this value you increase the time required to revoke permissions.

Alternatively, you can generate a list of tags to delete, and use that list to delete the tags. To create the list and delete the tags:

  1. Run the following shell script. The command just before the for loop ensures that list_o_tags.out is always reinitialized when starting the loop. After running this command, all the tags' names are written to the list_o_tags.out file:

    # Get a list of all tags in a certain container repository while considering [pagination](../../../api/rest/index.md#pagination)
echo -n "" > list_o_tags.out; for i in {1..N}; do curl --header 'PRIVATE-TOKEN: <PAT>' "https://gitlab.example.com/api/v4/projects/<Project_id>/registry/repositories/<container_repo_id>/tags?per_page=100&page=${i}" | jq '.[].name' | sed 's:^.\(.*\).$:\1:' >> list_o_tags.out; done

    If you have Rails console access, you can enter the following commands to retrieve a list of tags limited by date:

    output = File.open( "/tmp/list_o_tags.out","w" )
Project.find(<Project_id>).container_repositories.find(<container_repo_id>).tags.each do |tag|
  output << tag.name + "\n" if tag.created_at < 1.month.ago
end;nil
output.close

    This set of commands creates a /tmp/list_o_tags.out file listing all tags with a created_at date of older than one month.

  2. Remove any tags that you want to keep from the list_o_tags.out file. For example, you can use sed to parse the file and remove the tags.

    ::Tabs

    :::TabTitle Linux

    # Remove the `latest` tag from the file
sed -i '/latest/d' list_o_tags.out

# Remove the first N tags from the file
sed -i '1,Nd' list_o_tags.out

# Remove the tags starting with `Av` from the file
sed -i '/^Av/d' list_o_tags.out

# Remove the tags ending with `_v3` from the file
sed -i '/_v3$/d' list_o_tags.out

    :::TabTitle macOS

    # Remove the `latest` tag from the file
sed -i .bak '/latest/d' list_o_tags.out

# Remove the first N tags from the file
sed -i .bak '1,Nd' list_o_tags.out

# Remove the tags starting with `Av` from the file
sed -i .bak '/^Av/d' list_o_tags.out

# Remove the tags ending with `_v3` from the file
sed -i .bak '/_v3$/d' list_o_tags.out

    ::EndTabs

  3. Double-check the list_o_tags.out file to make sure it contains only the tags that you want to delete.

  4. Run this shell script to delete the tags in the list_o_tags.out file:

    # loop over list_o_tags.out to delete a single tag at a time
while read -r LINE || [[ -n $LINE ]]; do echo ${LINE}; curl --request DELETE --header 'PRIVATE-TOKEN: <PAT>' "https://gitlab.example.com/api/v4/projects/<Project_id>/registry/repositories/<container_repo_id>/tags/${LINE}"; sleep 0.1; echo; done < list_o_tags.out > delete.logs